Cotton Saw Ginning

Click On Image For Bigger View

Click On Image For Bigger View

Cottor Plants (India) Pvt.Ltd., offers an original design slow speed Saw Gin Machine having 90 saws or 128 and high speed sawing machine having 170 saws depending upon the capacity required.

The Saw Gin machine has inbuilt on the top pre-cleaner / opener having six spike drums for better cleaning of seed cotton before feeding to machine.

Also, it will have feeder with variable frequency drive to control feed rate in the machine depending upon the moisture contained in the seed cotton.

The lint produced by cotton Saw Gin machine is more cleaner and also the fibre breakage is low due to slow speed.

These machines are working very well on the research project at Circot – Nagpur and also at Haryana Seed Development Corporation for planting seed manufacturing factory.

Saw Ginning Equipments

Seed Cotton Suction System

Seed cotton suction system installed outside plant room collecting from platforms & feeding to the plant room.

System includes G.I. Piping bends, flow control valve, built in rock & stone catcher also includes piping from separator to heavy duty suction fan to pull seed cotton.

Rock catcher provided with trash discharge pipe with dump door near floor.

Click On Image For Bigger View

Air Separator

Air separator is equipped with vacuum wheel with revolving perforated screen & connected to the suction fan.

Air separator is sturdy design for modern cotton ginning system, evenly distribution & efficient removal of the fine trash & reduces contamination.

It works automatic & continuously suction of the seed cotton & acting as unloader.

Opener with Sawgin

Cottor Sawgins equipped with 90 & 120 saws of 12" dia. & ribs fitted with carbide tip at ginning point for longer life.

Seed cotton after cleaning in opener passes through saw cylinder separating white lint and cottonseed.

The sawgin have the feature of high capacity low lint trash content and simplicity of operation.

Condensor

Cottor Lint Condensor having maximum exposed drum area increases dust removal & minimizes pressure loss. It exposes lint to 90 % of the Condensor screen.

Air produced by the heavy duty fan & through Ginning machine & delivering lint from the Sawgin to Baling press or to lint cleaner continuously.

Cotton Pre–Cleaner

Cotton Pre-cleaner mainly used for removing the leaf, trash, sand dust, sticks & green bolls from the seed cotton & improving the quality of lint.

Seed cotton flows freely and gently through the machine having adjustable grid bars removes fine trash to prevent it from becoming embedded in the good quality lint.

Cotton pre-cleaner is used for processing the medium & long staple handpicked seed cotton.

Flow Diagram

Saw Ginnning Chart